Quick Find
Engine Rebuild Tools and Equipment
Below are a variety of engine tools as used by the top engine builders in preparing proven race tuned engines.
Cylinder Head Torque Honing Plate
160/200 Cylinder Head Torque Honing Plate
This is a torque honing plate used when honing or deglazing the bore. The plate replicates the stress put on the cylinder block when the cylinder head is torqued into position. It is recommended that the side case is also fitted.
Part Number: HTP-GX160-001
Our Price: £
Stock Available:
Genuine Honda Valve Seat Cutter Exhaust 45 degrees
Genuine Honda Valve Seat Cutter Exhaust 45 degrees
Part Number: 07780-001-0100
Our Price: £
Stock Available:
Genuine Honda Valve Seat Cutter Inlet 45 degrees
Genuine Honda Valve Seat Cutter Inlet 45 degrees
Part Number: 07780-001-0200
Our Price: £
Stock Available:
Genuine Honda Valve Seat Cutter Holder
Genuine Honda Valve Seat Cutter Holder
Part Number: 07781-001-0101
Our Price: £
Stock Available:
Genuine Honda Valve Guide Reamer
Genuine Honda Valve Guide Reamer
Part Number: 07984-200-0001
Our Price: £
Stock Available:
High Quality Piston Stop - Blue Anodized
High Quality Piston Stop - Blue Anodized
Fantastic piece to lock the piston when changing the sprocket, can be used on Rotax, 100cc & Prokart etc.
Part Number: eng_142
Our Price: £
Stock Available:
Cylinder Leakage Tester 2-Gauge
Cylinder Leakage Tester 2-Gauge
Part Number: VSE2020
Our Price: £
Stock Available:
Petrol Engine Compression Tester
Petrol Engine Compression Tester
Fitted with Ø65mm gauge having two scales (psi and kPa), reading from 0-300psi and 0-2000kPa.
Includes quick coupling 150mm rigid stem with cone-type adaptor and 320mm flexible adaptor with 14 and 18mm screw in adaptors.
Supplied in blow-moulded case with instructions.
Part Number: CT951
Our Price: £
Stock Available:
Piston Ring Compressor 75mm Ø53-175mm
Piston Ring Compressor 75mm Ø53-175mm
Quality construction with sprung steel wrap and ratchet action tension mechanism.
Supplied with steel key.
Part Number: VS156
Our Price: £
Stock Available:
Glaze Breaker Triple Leg Ø50-175mm 75mm Medium Stones
Glaze Breaker Triple Leg Ø50-175mm 75mm Medium Stones
For removal of heat glaze and carbon deposits on cylinder walls.
Fitted with 75mm, medium grade cutting stones and suitable for cylinders up to Ø175mm.
Range collar adjusts arm travel between Ø50mm and Ø100mm or Ø100mm and Ø175mm.
Adjustable spring tension gives finish control.
Part Number: VS162
Our Price: £
Stock Available:
Hand Held Valve Spring Compressor
Hand Held Valve Spring Compressor
Very useful tool for removing and fitting the collets on warm engines or when using the stiffer 18lb and 26lb Valve Springs and split keepers.
Part Number: VSPGCOMPRESS
Our Price: £
Stock Available:
Chrome Side Shroud and Pull Start.
Chrome Exhaust Shroud