Pushrod, Chrome Moly, 3/16", GX200, 6.5 Chinese OHV's, GX160, Each.

Heavy Duty Chrome Moly Push rods. Considerably stiffer than stock. Use with all HD springs. Capable of 10,000 RPM +

ALL PUSH RODS ARE SOLD INDIVIDUALLY. YOU MUST ORDER 2 PER MOTOR

Select Length based on the following.

GX200, 160, and 6.5 Chinese OHVs
5.260 Stock Length; Use with stamped Rocker Arms
5.160 (-.100); Use with Billet & Roller Rocker Arms
5.110 (-.150); Use with Billet/Roller Rockers along with extensive milling (>.065")
5.440 (+.180); Allows use of 160 Lifters in 200 blocks to reduce valve train weight. Reduces combined lifter/Pushrod weight by approx 7%. Use with stamped Rocker Arms
5.340 (+.080); Allows use of 160 Lifters in 200 blocks with Billet or Roller Rockers.

Also available in unfinished. Must be cut to length. Includes tube and two ends

All push rods are sold individually.

Note: Due to differences in cam base circles, deck heights, head milling, gasket thickness, etc. actual push rod length can vary. Pushrods are sold for the experienced engine builder.

We recommend you assemble the motor first and then determine correct pushrod length. One of the best ways is to grind a stock pushrod until you get correct geometry, measure, and order one closest to that size.